Datasheets
Overture Networks’ Management Solution provides carriers with complete visibility into the
supported Overture access network, using advanced monitoring and troubleshooting capabilities
designed to reduce operational cost and complexity. The Total Management Solution is purposefully
designed for easy integration into existing management systems and processes, resulting in lower
training costs and faster, easier deployments.
Overture Networks’ Management Solution provides carriers with complete visibility into the supported Hatteras access network, using advanced monitoring and troubleshooting capabilities designed to reduce operational cost and complexity. The Total Management Solution is purposefully designed for easy integration into existing management systems and processes, resulting in lower training costs and faster, easier deployments.
Overture Networks extends its award-winning Ethernet service delivery portfolio with the addition of its multi-faceted mini-aggregation plus drop and continue CO-based and demarcation (CPE) devices. The mini-aggregator and drop and continue (Subtending S-Series) products can be connected to each other over copper or circuit in a ring or linear chain configuration. Product models are offered for HN400-S, HN500-S and HN600-S series respectively.
Overture Networks' family of Repeaters and Line Power Modules enable a Service Provider to ubiquitously deploy Mid-Band Ethernet services independent of the traditional distance limitations of copper services, reaching sites more than 25 Miles (40km) from the nearest serving office. Even when distance isn’t the primary concern, the Repeaters and Line Power Modules can be used to increase the service rates to a customer, particularly when there are a limited number of lines available to the desired location.
Overture Networks' HN400 series award winning Ethernet service delivery products extend the Ethernet Services to sites without access to fiber. Boasting a powerful Ethernet in the First Mile (EFM) solution, the HN400 series quickly and economically delivers managed, symmetrical bandwidth and services at rates of up to 15 Mbps per pair over outside plant copper utilizing standards-based 2BASE-TL technology (Ethernet over Bonded Copper).
Overture Networks' EtherFlex HN4000e is a self-contained service delivery engine. The HN4000e is a purpose-built Ethernet switching and VLAN labeling platform for delivering from 2 to over 100 Mbps of symmetrical Ethernet services over a single-bonded-copper-infrastructure. Because it eliminates the need for a local optical switch, it dramatically reduces latency and jitter. It effectively extends a carriers' service reach beyond their existing optical switching footprint - increasing the revenue potential while reducing CapEX. It does all of this while ensuring that Service Level Agreements are being tracked and managed.
Overture Networks introduces a new family of Ethernet-over-PDH demarcation devices. The HN500 series provides a cost-effective solution for bonding multiple PDH signals (T1 or E1) into a single Ethernet connection, delivering over 10 Mbps of Ethernet service capacity to any business customer regardless of rate, reach, or facility availability issues.
Overture Networks’ HN600 series delivers carrier class DS1/E1, and high-speed Ethernet services over the existing copper infrastructure to the cell tower and to the customer premise. The HN600 series is a cost effective solution that quickly and economically delivers up to 60 Mbps of services over 4 copper pairs, essentially extending the optical service area to the those locations that are only served with copper.
The HN6100 supports Ethernet over Copper customer premises equipment (CPE) via Overture Networks' HN400 Series, Ethernet over Time Division Multiplexing (TDM) and Ethernet over DS3 and NxT1/E1 via the HN500 Series and TDM over Ethernet CPE via the HN600 Series with PWE3-plus, Overture Networks' revolutionary, patented method of simultaneously transporting native Ethernet and native TDM over copper for Mobile Backhaul solutions. The same HN6100 multi-service chassis will also support Ethernet over Fiber interfaces..
Learn how the ISG140M and ISG180M can help you reach off-net customers easily and economically using existing T1/E1 lines and MLPPP.
Learn more about how the ISG2200 can be used as standalone product for single customer applications, or in conjunction with the ISG5100 for larger sub-tending configurations.
Learn more about how the ISG2x can provide carrier-grade demarcation within metro and access networks. Designed for cellular hubs,
aggregation nodes, and carrier hand-offs, the ISG2x segments, monitors and bridges diverse networks, to deliver pervasive OAM
and performance monitoring visibility.
The ISG 34 is designed for single customer Ethernet over E3 applications and gives providers a way to reach more customers—without installing costly new infrastructure.
The ISG400 delivers a high-performance, high-reliability, flexible solution for Carrier Ethernet over both native Ethernet and existing infrastructure.
The ISG45 and ISG45+ are ideally suited for single customer Ethernet over DS3 applications and give providers a way to reach more customers—without installing costly new infrastructure.
The ISG 4800 is a modular 10 Gigabit Carrier Ethernet edge platform that enables service providers and network operators to economically address any 10Gbps edge application with a single high-performance solution
The ISG5000 is a converged packet access platform that bridges TDM and packet worlds to deliver flexible, high-speed Ethernet and TDM services over metro backbones.
The ISG5100 is an enhanced version of the ISG5000 converged packet access platform that bridges TDM and packet worlds to deliver flexible, high-speed Ethernet and TDM services over metro backbones.
Learn how to aggregate all of your TDM-based Carrier Ethernet and IP services onto the ISG6000, bypass edge routers and simplify your aggregation strategy.
This UTS4000 series of multi-service edge product is a 1G Carrier Ethernet edge platform optimized for mobile backhaul applications. And with optional TDM circuit emulation pseudo-wire support, up to 24 T1s can be transported across an Ethernet network at a fraction of the cost of traditional TDM networks.
When you need to aggregate 10s to 100s of ISG140V or ISG180V (or any industry standard VCAT bonded T1) edge platforms, the UTX8214 is the fully redundant central office grade solution.
As a T1 circuit emulation pseudo-wire gateway capable of terminating over 1000 T1s from an Ethernet network, the UTX 8500 is the perfect complement to the UTS 4000 edge platform.
