Ethernet Access
1 Mbps to 1 Gbps to any customer location
On-net or Off-net
1 Mbps to 1 Gbps to any customer location
On-net or Off-net
ISG 5100 and ISG 5000
- 1st level aggregation for Ethernet over fiber, SONET/SDH and copper
- Four (4) slot flexible chassis designed for medium to large customers
- Full suite of managed carrier-class Ethernet and TDM services
- High-availability platform, NEBS 3 certified
- MPLS/VPLS support
Carrier Ethernet networks today require a solution that enables carriers to offer new high-speed packet services while continuing to support the large, existing demand for traditional voice, data and video services. Overture Networks has developed a multi-service access platform that allows carriers to deliver all of their metro services economically, flexibly and reliably, whether the underlying infrastructure is SONET/SDH or Ethernet-based.
))
click to view detail
The ISG 5100(an updated version of the ISG 5000) is a converged packet access platform that bridges TDM and packet worlds to deliver flexible, high-speed Ethernet and TDM services over metro backbones.
The Overture Networks ISG 5100 is optimized for medium to large enterprises, multi-tenant buildings or service aggregation. This powerful unit is NEBS 3 certified and accommodates up to four plug-in interface cards with a full range of Ethernet and TDM interfaces to support a variety of multi-service applications, including:
- Ethernet services over DS3 and SONET/SDH
- Multi-service Gigabit Ethernet
- T1, E1 or J1 transport over packet networks
- Transparent LAN service
- IP/MPLS
- VPLS
The ISG 5100 enables service providers to:
- Deliver high-speed, metro-class Ethernet services
- Support traditional T1 (E1 or J1) circuit-based voice/data/video services over Ethernet/IP with the same “no compromise” quality and robustness as a circuit delivered in native TDM over SONET/SDH.
- Use their installed SONET/SDH or Ethernet networks to support traditional voice and leased-line traffic, while moving towards a data-optimized network that can keep pace with customers’ bandwidth needs.
- Transport multi-service traffic efficiently across a single network to reach all customers with the same services and the same service levels.
Technical Specifications
Interface Modules (4 slots)
- 1-port GigE (SFP)
- Dual GigE ring card
- Protected Switching Ring (PSR) - 8-port 10/100Base-T (RJ45)
- 8-port 100Base-FX (Duplex LC)
- Combo card 4x10/100Base-T, 2x100FX (SFP)
- 1-port OC-12c/STM-4c (SFP)
- X.86, GFP - 1-port OC-3c/STM-1 (SFP)
- X.86, GFP - 3-port DS3 (BNC)
- X.86, GFP/VCAT - 1-port ChDS3 (BNC)
- MLPPP - 8-port T1/E1 (RJ48c)
- MLPPP or circuit emulation
Management
- In-band or out-of-band
- SNMP
- CLI (RS-232 / TELNET)
- FTP to download multiple software images and configurations
- 10/100 Base-T management port (RJ48c)
- 2-port BITS timing interface (RJ48c)
- EdgeAware intelligent management
- L2+ Classification
Ethernet Services
- 802.1D bridging
- 802.1p prioritization
- 802.1q VLAN tagging/stacking
- VLAN switching
- MPLS/VPLS option
- Rate-limiting per port or VLAN:
- 1 Mb/s increments (1 to 100M)
- 50 Mb/s increments (100 to 1000M) - 802.3ad Link Aggregation
- Protected Switching Ring (50 m/sec)
- Spanning Tree Protocol
Circuit Emulation Services
- Framed or unframed mode
- Fixed or Adaptive Jitter Buffer
- Adaptive, BITS, Loop or Internal (Stratum 4) timing modes
- Round-trip and one-way delay measurements
- Local and remote loopbacks
- ANSI t1.231 reports
Physical
- 2.2” x 17” x 20” (h x w x d)
- Dual hot-swappable power supplies
- AC: 90-264 VAC auto ranging
- DC: -36 VDC to -60 VDC
- 100-Watt maximum power consumption - 0° to 40°C (operating)
- -20° to 80°C (storage)
- FCC Part 15 – Class A
- UL/EN 60950
- CE Mark
- NEBS 3 certified
ISG 140 and ISG 180
Need a way to deliver managed Ethernet services over bundled T1 or E1 circuits? The award winning ISG 140 and ISG 180 provide the most cost-effective way to reach those remote offices.
NEW ISG 800