ISG5100

ISG5100

  • 1st level aggregation for Ethernet over fiber, SONET/SDH and copper
  • Four (4) slot flexible chassis designed for medium to large customers
  • Full suite of managed carrier-class  Ethernet and TDM services
  • High-availability platform, NEBS 3 certified
  • MPLS/VPLS support

Carrier Ethernet networks today require a solution that enables carriers to offer new high-speed packet services while continuing to support the large, existing demand for traditional voice, data and video services. Overture Networks has developed a multi-service access platform that allows carriers to deliver all of their metro services economically, flexibly and reliably, whether the underlying infrastructure is SONET/SDH or Ethernet-based.


The ISG 5100(an updated version of the ISG 5000) is a converged packet access platform that bridges TDM and packet worlds to deliver flexible, high-speed Ethernet and TDM services over metro backbones.

The Overture Networks ISG 5100 is optimized for medium to large enterprises, multi-tenant buildings or service aggregation. This powerful unit is NEBS 3 certified and accommodates up to four plug-in interface cards with a full range of Ethernet and TDM interfaces to support a variety of multi-service applications, including:

  • Ethernet services over DS3 and SONET/SDH
  • Multi-service Gigabit Ethernet
  • T1, E1 or J1 transport over packet networks
  • Transparent LAN service
  • IP/MPLS
  • VPLS

Based on a flexible, IP centric architecture, the ISG 5100 uses programmable processors to support new protocols, interfaces and features as they emerge. The result is a flexible solution that supports diverse services and topologies, and can scale quickly and easily as the network evolves.

The ISG 5100 enables service providers to:

  • Deliver high-speed, metro-class Ethernet services
  • Support traditional T1 (E1 or J1) circuit-based voice/data/video services over Ethernet/IP with the same “no compromise” quality and robustness as a circuit delivered in native TDM over SONET/SDH.
  • Use their installed SONET/SDH or Ethernet networks to support traditional voice and leased-line traffic, while moving towards a data-optimized network that can keep pace with customers’ bandwidth needs.
  • Transport multi-service traffic efficiently across a single network to reach all customers with the same services and the same service levels.

With the ISG 5100, service providers can create a secure, reliable network that resolves today’s multiservice challenges while continuing to set the stage for migration to next-generation networking.

Technical Specifications

Interface Modules (4 slots)

  • 1-port GigE (SFP)
  • Dual GigE ring card
    - Protected Switching Ring (PSR)
  • 8-port 10/100Base-T (RJ45)
  • 8-port 100Base-FX (Duplex LC)
  • Combo card 4x10/100Base-T, 2x100FX (SFP)
  • 1-port OC-12c/STM-4c (SFP)
    - X.86, GFP
  • 1-port OC-3c/STM-1 (SFP)
    - X.86, GFP
  • 3-port DS3 (BNC)
    - X.86, GFP/VCAT
  • 1-port ChDS3 (BNC)
    - MLPPP
  • 8-port T1/E1 (RJ48c)
    - MLPPP or circuit emulation

Management

  • In-band or out-of-band
  • SNMP
  • CLI (RS-232 / TELNET)
  • FTP to download multiple software images and configurations
  • 10/100 Base-T management port (RJ48c)
  • 2-port BITS timing interface (RJ48c)
  • EdgeAware intelligent management
  • L2+ Classification

Ethernet Services

  • 802.1D bridging
  • 802.1p prioritization
  • 802.1q VLAN tagging/stacking
  • VLAN switching
  • MPLS/VPLS option
  • Rate-limiting per port or VLAN:
    - 1 Mb/s increments (1 to 100M)
    - 50 Mb/s increments (100 to 1000M)
  • 802.3ad Link Aggregation
  • Protected Switching Ring (50 m/sec)
  • Spanning Tree Protocol

Circuit Emulation Services

  • Framed or unframed mode
  • Fixed or Adaptive Jitter Buffer
  • Adaptive, BITS, Loop or Internal (Stratum 4) timing modes
  • Round-trip and one-way delay measurements
  • Local and remote loopbacks
  • ANSI t1.231 reports

Physical

  • 2.2” x 17” x 20” (h x w x d)
  • Dual hot-swappable power supplies
    - AC: 90-264 VAC auto ranging
    - DC: -36 VDC to -60 VDC
    - 100-Watt maximum power consumption
  • 0° to 40°C (operating)
  • -20° to 80°C (storage)
  • FCC Part 15 – Class A
  • UL/EN 60950
  • CE Mark
  • NEBS 3 certified
Tooltip content goes here.